CT-12 LASER JAMMER wireless, ALF Electronics Ltd.- Laser jammer, Our company produce electronic-related car accessory

Latest laser jammer program update version TMM.

	X2 LASER LED (Wire) LASER LED

	CT-12 LASER JAMMER (Wire) LASER LED

	CT-12 LASER JAMMER (Wireless) LASER LED

	CS-56 I LASER DIODE (Wire)

	CS-56 II LASER JAMMER (Wire) LASER DIODE

	CS-56 II LASER JAMMER (Wireless) LASER DIODE

	CT-12 LASER JAMMER BY MOTORCYCLE

	HP-911 LASER TESTER

> Product > Laser Jammer (wireless)

LASER JAMMER

CT-12 LASER JAMMER

CT-12 LASER JAMMER (wireless)

1.	Power Key of in-car wireless control-computer can turn on and turn off the power wirelessly
2.	Hi / Lo Key of in-car wireless control-computer can control the volume(Green light for low pitch and Red light for high pitch).
3.	Wireless emitter of the control unit shows its connection through light. (With light on, the connection is OK; with the light off, the connection is off.)
4.	Wireless transmission adopt 2.4G rate, wireless two-way module. (International specification fits FCC).
5.	The system can be upgraded to latest version
6.	Smart automatic frequency searching
7.	In-car control unit can go with multiple wireless transmitters.( four sets to its maximum).
8.	Compatible to all kinds of vehicle.
9.	Efficient defense toward portable laser speed detector & PDA laser speed detector.
10.	Worldwide specification. Useful to laser gun speed detectors anywhere.
11.	The widest range protection & the highest stability.
12.	The widest range protection & the highest stability.

Product Accessories:

1. In-car wireless control computer

2. Laser jammer .

3. Car charger adapter

4. Spirit level

5. Metal hook

6. Bend

7. Screw, nut

8. Two-sides type

9. Transmitter in engine compartment

10. Ble of transmitter car compartment

Product Specification:
Voltage:	12 V ~ 15 V
Temperature:	-20 ° C ~ 80 ° C
Texture:	ABS, PC
Total weight:	750g (include package and accessories)
Dimension:	L30.5cm x W17cm x H7cm
Producing country:	Taiwan
Wireless transmission:	2.4G (follow the international FCC communication protocol )

Installation instruction and steps:

1.	Fix the laser jammer on both sides of your license plate. The distance between the two jammers should be around 60cm~80cm. (See Pic1)
2.	Take out the spirit level. Keep the bubble in the middle, not upside or downside. (See Pic2). There should be no objection in front of the jammer. The two jammers should keep horizontal, not lopsided, or the efficiency would be affected. (See Pic3)
3.	Please connect the cable of jammer to the transmitter in engine compartment.
4.	the cables of transmitter must be connected to the positive and negative battery of the engine compartment. (Red for + and Black for -).
5.	Connect in in-car control computer to the car charger adapter. Start the engine to test
6.	The Power indicator and Hi/Lo indicator of the in-car control computer will be on.
7.	Examine the red indicator of the transmitter in the engine compartment. If it is on, the laser jammer functions normally.